XShield Tints
    • Automotive window tinting
    • Residential window tinting
    • Commercial window tinting
    • Chameleon window tinting
    • Langley
    • Coquitlam
    • Richmond
    • Maple Ridge
    • Abbotsford
    • Chilliwack
    • North Vancouver
    • Vancouver
  • Our Story
  • Refer a Friend
  • Reviews
  • Contact Us
  • Customer Login
778.239.5486 Get a Quote 778.239.5486
XShield Tints
    • Automotive window tinting
    • Residential window tinting
    • Commercial window tinting
    • Chameleon window tinting
    • Langley
    • Coquitlam
    • Richmond
    • Maple Ridge
    • Abbotsford
    • Chilliwack
    • North Vancouver
    • Vancouver
  • Our Story
  • Refer a Friend
  • Reviews
  • Contact Us
  • Customer Login
Call 778.239.5486

Window film installation terms

These terms apply to automotive window-film services performed by XShield Tints in British Columbia. By accepting these terms and authorizing the work, the customer confirms that they have reviewed and understood the following conditions, limitations, installation characteristics, and customer responsibilities.

Deposit payments ask you to accept these terms before the installation is booked. The same text is what View Terms opens on the payment page.

Authorization Shade and appearance Factory privacy glass Minor imperfections Curing Roll-down restriction Dot matrix Pre-existing glass Photos of the vehicle Defroster and antenna Film removal Chips and cracks Seat belts Window seals Aftermarket equipment Electronics and sensors B.C. tint law Cleaning Cold weather Inspection Warranty exclusions Personal property Declining work Pricing Acknowledgement Entire agreement

1. Customer authorization

The customer authorizes XShield Tints to perform the window-film installation and any other services specifically identified on the customer’s booking, work order, or invoice.

The customer confirms that they are the registered owner of the vehicle or have authorization from the owner to approve the requested work.

The customer is responsible for confirming that the vehicle information, windows to be tinted, film type, shade, and other requested services shown on the booking or work order are correct before installation begins.

2. Window-film appearance and shade selection

Window-film percentages describe the approximate visible-light-transmission characteristics of the film itself and do not guarantee an exact final appearance or final combined light transmission once installed on automotive glass.

The final appearance may vary due to:

  • existing factory-tinted or privacy glass
  • factory glass colour and light transmission
  • vehicle interior colour
  • exterior and interior lighting
  • weather conditions
  • viewing angle
  • differences between photographs, electronic displays, film samples, and an actual installed product.

The customer confirms that they have selected and authorized the film type and shade listed on their booking or work order.

XShield Tints does not guarantee that installed film will look identical to photographs, online examples, another vehicle, or a sample viewed under different lighting conditions.

3. Factory privacy glass

Factory privacy glass and aftermarket window film are different products.

Where film is installed over factory privacy glass, the existing glass will affect the final appearance and light transmission.

The same film percentage can therefore appear different on different vehicles or on different pieces of glass.

4. Hand-installed product and minor imperfections

Automotive window film is an aftermarket product installed by hand in a working automotive environment.

XShield Tints uses reasonable professional care to produce a high-quality installation. A completely contamination-free or visually perfect installation cannot reasonably be guaranteed.

Minor characteristics may include small particles, fibres, specks, very small edge gaps, minor visual distortion, or other minor cosmetic characteristics that do not materially affect the function or overall appearance of the film.

The presence of a minor isolated cosmetic imperfection does not by itself establish defective workmanship.

Any genuine installation concern should be brought to XShield Tints for inspection after the film has had sufficient time to cure.

5. Curing, moisture, haze, and temporary appearance

Window film is installed using a liquid slip solution.

Immediately following installation and throughout the curing process, the customer may observe:

  • haze
  • cloudiness
  • small water pockets
  • moisture patterns
  • streak-like appearances
  • temporary distortion
  • other changes in appearance.

These conditions can be a normal part of the drying and curing process and normally diminish as moisture evaporates.

Curing time varies depending on film type, temperature, humidity, weather, glass construction, and other environmental conditions. Complete curing may take several days or several weeks.

The customer agrees not to treat temporary curing-related moisture or haze as an installation defect before allowing a reasonable curing period.

6. Window roll-down restriction

The customer agrees not to roll down newly tinted movable windows for a minimum of 3–5 full days after installation, or longer if instructed by XShield Tints because of cold or damp weather.

Rolling down a window prematurely may cause the film to peel, lift, shift, or become damaged.

Damage caused by rolling down the window before the instructed curing period is not an installation defect and may not be covered by workmanship warranty.

7. Dot matrix, frit, and ceramic border

Many automotive windows have raised ceramic dots or a textured ceramic border commonly known as a dot matrix or frit.

Because window film is applied over these raised surfaces rather than completely flat glass, the film may not make uniform contact between the dots.

This may produce:

  • a white, grey, or silver-looking border
  • inconsistent adhesion
  • visible air channels
  • uneven-looking edges
  • a lighter or silver appearance around the perimeter.

The customer acknowledges that this appearance can be an inherent characteristic of the vehicle’s glass construction and does not automatically indicate defective workmanship.

8. Pre-existing glass condition

Window film can make existing glass defects more noticeable.

The customer acknowledges that vehicle glass may already contain:

  • scratches
  • fine vertical scratches caused by window seals
  • chips
  • cracks
  • pitting
  • weld spatter
  • hard-water etching
  • wiper marks
  • damaged or deteriorated coatings
  • damaged seals or weather stripping
  • previous adhesive residue
  • imperfections in the glass
  • other pre-existing damage.

These defects may become substantially more visible after darker window film is installed.

XShield Tints is not responsible for pre-existing damage or conditions that become more noticeable after installation.

9. Vehicle condition documentation

The customer authorizes XShield Tints to inspect and reasonably photograph or video the vehicle, glass, trim, and surrounding areas before, during, and after service for:

  • documenting pre-existing condition
  • verifying completed work
  • resolving warranty or damage questions
  • internal quality-control purposes.

Any separate use of identifiable customer information or imagery for advertising is handled according to the Privacy Policy.

10. Rear defroster and antenna elements

Rear-window defroster lines, antennas, and similar conductive elements are thin components bonded or printed onto the glass.

These components can deteriorate due to age, ultraviolet exposure, prior film installation or removal, previous damage, cleaning, corrosion, or other factors.

XShield Tints will use reasonable care when working around these components.

XShield Tints does not guarantee the condition or continued operation of already aged, deteriorated, damaged, or previously compromised defroster, antenna, or similar elements.

Any known problems with rear defrosters, antennas, or electronics should be disclosed before installation.

11. Existing window-film removal

Where the service includes removal of previously installed window film, the customer acknowledges that removal can expose pre-existing damage or deterioration.

Old film or adhesive may be strongly bonded to:

  • defroster lines
  • antenna elements
  • coatings
  • damaged glass
  • seals
  • trim
  • previously repaired components.

XShield Tints will use reasonable care during removal but cannot guarantee preservation of a component that was already aged, deteriorated, loose, damaged, or compromised before the removal service.

12. Glass chips, cracks, and pre-existing stress

Automotive glass may contain invisible or visible chips, cracks, manufacturing stresses, edge damage, or other weaknesses.

Changes in temperature, sunlight, heating systems, vehicle movement, and other environmental conditions can cause a pre-existing weakness to develop or spread.

The customer agrees to disclose any known chips or cracks before installation.

Nothing in these terms excludes responsibility that cannot lawfully be excluded, including responsibility arising from XShield Tints’ own actionable negligence where applicable.

13. Seat-belt damage

The customer should use care when releasing seat belts located next to tinted glass.

A seat-belt buckle striking the glass may chip, scratch, or damage window film.

Damage caused after installation by seat belts, cargo, jewellery, pets, tools, cleaning equipment, or other objects is not an installation defect.

14. Weather stripping and window seals

Dirt and debris may accumulate inside or underneath vehicle window seals and weather stripping over time.

On movable windows, this debris may create vertical marks or scratches in the glass or film as the window moves.

XShield Tints is not responsible for scratching caused after installation by contaminated, deteriorated, excessively tight, or damaged vehicle seals unless the damage was directly caused by XShield Tints’ workmanship.

15. Aftermarket equipment and vehicle modifications

The customer must disclose any relevant aftermarket equipment or modifications before service, including equipment located on or near windows.

This may include:

  • aftermarket electronics
  • cameras
  • dashcams
  • antennas
  • alarm components
  • wiring
  • sensors
  • aftermarket trim
  • stickers
  • mounts
  • previous glass repairs
  • non-factory glass.

XShield Tints is not responsible for undisclosed pre-existing defects or failures in aftermarket equipment.

16. Electronic components and sensors

Modern vehicles may contain cameras, antennas, sensors, wiring, electronics, or other components located around automotive glass.

XShield Tints will use reasonable installation procedures around such components. The customer should disclose known equipment problems before service.

Nothing in these terms excludes liability that cannot legally be excluded.

17. B.C. window-tint law

The customer acknowledges that British Columbia regulates the placement of material that reduces light transmitted through automotive glazing.

As of the date of these terms, B.C.’s Motor Vehicle Act Regulations provide that such material generally may be placed on:

  • the windshield only within the uppermost 75 mm
  • side windows behind the driver
  • the rear window where the vehicle is equipped with outside rear-view mirrors on both the left and right sides.

Material reducing light transmission is therefore generally not permitted on the windshield below that upper area or on the side windows forward of the driver when the vehicle is driven or operated on a highway.

The customer remains responsible for the lawful operation and use of their vehicle and for compliance with applicable laws.

18. Cleaning and customer care

The customer agrees to follow XShield Tints’ aftercare instructions.

Do not clean newly installed film until the instructed initial curing period has passed.

Once cleaning is appropriate:

  • use a clean, soft cloth or microfibre towel
  • use a window-film-safe cleaner
  • avoid abrasive pads, blades, or scraping tools
  • avoid cleaners containing ammonia unless the film manufacturer specifically confirms the product is compatible.

Damage caused by improper cleaning or customer misuse is not considered defective workmanship.

19. Cold-weather operation

During freezing or very cold weather, windows may freeze to weather stripping or seals.

The customer should ensure the vehicle and window are sufficiently defrosted before operating a newly tinted movable window.

XShield Tints is not responsible for film damage caused by operating a frozen or obstructed window.

20. Workmanship concerns and inspection

If the customer believes there is an installation-related defect, the customer should contact XShield Tints within a reasonable period and allow XShield Tints a reasonable opportunity to inspect the vehicle.

The customer should not remove, alter, repair, or have another installer remove the affected film before XShield Tints has had a reasonable opportunity to inspect the concern, unless reasonably necessary to prevent further damage or for safety.

Where a legitimate workmanship defect is confirmed and covered by XShield Tints’ applicable workmanship warranty, XShield Tints will address the issue according to that warranty.

21. Warranty exclusions

Unless otherwise required by law or covered by an applicable written warranty, damage resulting from the following is generally not considered an installation workmanship defect:

  • accidents
  • vandalism
  • misuse
  • impact
  • scratches caused after installation
  • seat belts
  • pets
  • cargo
  • improper cleaning
  • abrasive materials
  • premature window operation
  • failed or damaged window mechanisms
  • contaminated window seals
  • glass replacement
  • body repairs
  • aftermarket modifications
  • subsequent work performed by another party.

Any film-manufacturer warranty and any XShield Tints workmanship warranty are separate and may have different terms and coverage.

22. Vehicle items and personal property

Customers should remove valuables and loose personal items from areas surrounding the windows before service.

XShield Tints is not responsible for undisclosed fragile or loose items left inside the vehicle except to the extent responsibility arises from XShield Tints’ own actionable negligence or otherwise cannot legally be excluded.

23. Right to decline or stop work

XShield Tints may decline, postpone, or stop an installation where the condition of the glass, vehicle, previous film, electronics, weather, or working environment creates a reasonable concern regarding safety, installation quality, or potential vehicle damage.

If an unforeseen condition is discovered, XShield Tints may contact the customer before proceeding with additional work or charges.

24. Pricing and additional work

The quoted price applies to the services described in the customer’s booking or quotation.

Additional charges may apply where previously undisclosed or unexpected conditions require additional work, including significant adhesive removal, multiple layers of old film, or unusual contamination.

Where reasonably practicable, XShield Tints will obtain customer approval before performing chargeable work materially outside the agreed service.

25. Customer acknowledgement

By selecting the acceptance checkbox and continuing with the booking, the customer confirms that:

I have read and understood XShield Tints’ Window Film Installation Terms, Customer Acknowledgement & Authorization. I understand the normal characteristics and limitations of automotive window-film installation, curing requirements, aftercare responsibilities, and the risks associated with pre-existing vehicle and glass conditions. I authorize XShield Tints to perform the services selected in my booking, subject to these terms.

Nothing in these terms is intended to waive any right or protection that cannot legally be waived under applicable British Columbia law.

26. Entire agreement

These terms, together with the customer’s booking, work order, invoice, and any applicable written warranty or policy expressly incorporated into them, constitute the agreement relating to the window-film services being provided. Any changes to the agreed services or pricing must be confirmed by XShield Tints and the customer.

XShield Tints

Striving for perfection in every pane — protecting homes, businesses, and vehicles across Surrey and the Lower Mainland.

Your world protected.
Your comfort elevated.

778.239.5486
6875 King George Blvd #4
Surrey, BC V3W 5A1

Explore

  • Home
  • Our Story
  • Refer a Friend
  • Contact Us
  • Request a Quote

Services

  • Residential window tinting
  • Automotive window tinting
  • Commercial window tinting
  • Chameleon window tinting

Areas We Serve

  • Langley
  • Coquitlam
  • Richmond
  • Maple Ridge
  • Abbotsford
  • Chilliwack
  • North Vancouver
  • Vancouver
© XShield Tints. All rights reserved.
Privacy Policy Cookie Policy Installation Terms Windshield Acknowledgement Aftercare
Website Design & develop by · Humanverse Inc